Sheet Metal: Step-by-Step Examples, Tips and Tricks

• Adding a flange to a solid
• Adding a flange to a solid using a reference plane to define the bend angle
• Adding flanges to a solid starting from a profile
• Adding an extruded flange to a solid
• Adding extruded flanges to a chain of solid edges
• Adding extruded flange to a solid using chain option
• Adding extruded flange to a solid using tangency chain option
• Adding extruded flanges of varying length
• Adding rips to a shelled solid
• Adding rip on a vertex of a solid
• Adding a Step Bend to a solid
• Adding extruded flanges to coplanar edges of a solid controlling the orientation of the profile
• Bending a solid
• Bending a solid along a profile lying on one of its faces
• Managing interference during Rebend
• Managing interference during Unbend
• Bending a solid along a profile (containing slots) lying on one of its faces
• Closing the corner between two adjacent walls
• Converting a Solid To SheetMetal ad Getting Its Flat Pattern View
• Creating a bend on a single edge or fillet
• Creating bends on the edges of a face
• Creating a box with flanges and hems starting from the very beginning
• Creating a flange with user defined profile
• Creating a flat pattern view
• Creating a Hem
• Creating a rip along a profile lying on a face of a solid
• Creating a rip using two points on the solid
• Creating a curved rip and unbending the shelled solid
• Creating a solid flange
• Creating thick sheet metal features
• Customizing a Bend Table File
• Joining two solids using union with bend
• Rebending a solid
• Removing filleted faces from a solid to create rips
• Unbending a solid
• Unbending a solid with sharp edges
• Unbending a solid with Normal side faces option
• Unbending of Doubly Curved Surfaces
• Viewing various Bend Tables in the Bend Table Manager
• Filtering the data in the Bend Table Manager
• Importing a file into the Bend Table Manager
• Exporting a file from the Bend Table Manager
• Editing data in the Bend Table Manager
• Copying data in the Bend Table Manager
• Deleting data from the Bend Table Manager
• Hiding and Unhiding data in the Bend Table Manager
• Creating Sheet Metal Features using Bend Table data
• Using Sheet Metal Wizard to Create Sheet Metal Components
• Defining multiple bend groups to created sheet metal components by using Sheet Metal Wizard