Identify Measured Data | Enables you to find the correspondence between an initial and measured mesh, but will identify the deformation corresponding to the compensation to be applied on the base Mesh. |
Blank-Holder Addendum and Part | Enables you to modify the die environment based on the result obtained by adaptation/compensation process. |
Offset Mesh | Enables you to offset a selected mesh by a specified offset value. |
Check Symmetry | Enables you to detect symmetry conditions in a selected mesh entity. |
Adapt on Measured Data | Enables you to find the correspondence between an "Initial Mesh" (corresponding to a base geometry) and a "Measured Mesh" (corresponding to a modification of the base geometry). The result can then be used to match the initial mesh with the measured one. |