Graphics Cards tips

• Internal Error with rotate/pan/dynamic zoom of shaded model
• Incorrect preview, not aligned highlight or refresh problems
• The application crashes with graphics preview or graphics preview and rubberbanding are not correct
• The application crashes saving a document
• The application crashes when opening a document

Internal Error with rotate/pan/dynamic zoom of shaded model

When an internal error with rotate/pan/dynamic zoom happens or there is an excessive slowness in regenerating the view, the problem can be solved by setting the Hardware display list in the Dynamic Visualization category of the System Options to Simplified.

Incorrect preview, not aligned highlight or refresh problems

Likely reason: the copy swap mode is not correct.

• Check the driver version and configuration
• Re-execute Self Tune
• Try checking Force Copy swap
  
  

The application crashes with graphics preview or graphics preview and rubberbanding are not correct

Check the display driver version and configuration of the driver and then run the Self Tune command in the Graphics - Graphics Card category of the System Options.
If the driver is already up to date and correctly configured, but the problem persists, possibly the problem lies with the file preview; in this case, the following are the possible solutions:

• Try checking Force Copy swap in the Graphics - Graphics Card category of the System Options.
• Clear the Enable KTX extension check box in the Graphics - Graphics Card category of the System Options.

The application crashes saving a document

Check the display driver version and configuration of the driver and then run the Self Tune command in the Graphics - Graphics Card category of the System Options.
If the driver is already up to date and correctly configured, but the problem persists, possibly the problem lies with the file preview; in this case, these are the possible solutions:

• Set FilePropertiesPreviewCreation mode to Never.
• Clear the Enable pbuffer extension check box in the Graphics - Graphics Card category of the System Options.

The application crashes when opening a document

Check the display driver version and configuration of the driver and then run the Self Tune command in the Graphics - Graphics Card category of the System Options.

If the driver is already up to date and correctly configured, but the problem persists, clear the Enable hardware acceleration check box in the Graphics - Graphics Card category of the System Options. Exit from the application and run it again.